Results 1 to 10 of 10

Thread: obd-II read & flash

  1. #1
    Potential Tuner
    Join Date
    Aug 2003
    Location
    Posts
    2

    obd-II read & flash

    I have been trying to find information relating to reading and writing the calibration in the EEC-V via the obd-II port. I have found many documents that describe pulling the DTC and Monitor realtime data. But nothing on accessing the calibration.

    Anyone have any insite here. This is going to be a hot topic once for stops producing EEC's with the j3 port.

    Awsome forum lets catchup with the GM guys!!!

    Thanks,
    Mike

  2. #2
    Tuner in Training jfunk's Avatar
    Join Date
    Apr 2003
    Location
    San Diego
    Posts
    46

    Re: obd-II read & flash

    I haven't been able to find anything either. But I just got an EEC-V that came out of a focus and I'm going to start hacking into that. I'm trying to find the datasheets on the IC's now

    2000 Ford Focus SE

  3. #3
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394

    Re: obd-II read & flash

    Keep us informed!
    We got this guy Not Sure, ...

  4. #4
    Tuner in Training jfunk's Avatar
    Join Date
    Apr 2003
    Location
    San Diego
    Posts
    46

    Re: obd-II read & flash

    This is the data that my EEC-V from a 2000 focus sends out when it's first turned on. The EEC-V is not in a car though. It looks like EEC-V is polling for some responses. Does anyone have any info on the functional addresses the EEC-V is trying to talk to?

    00 05 10 04 00 08 0B 61 00 31
    81 3B 10 04 40 36
    41 88 10 A3 AE
    < A1 7B 10 02 00 C5
    81 1B 10 25 00 00 00 00 00 81
    A1 7B 10 02 00 C5
    81 1B 10 25 00 00 00 00 00 81
    A1 7B 10 02 00 C5
    81 1B 10 25 00 00 00 00 00 81
    A1 7B 10 02 00 C5
    81 1B 10 25 00 00 00 00 00 81
    A1 7B 10 02 00 C5
    A1 7B 10 02 00 C5
    A1 7B 10 02 00 C5
    A1 7B 10 02 00 C5
    A1 7B 10 02 00 C5
    A1 7B 10 02 00 C5 >
    <repeats>
    2000 Ford Focus SE

  5. #5

  6. #6
    Tuner in Training
    Join Date
    Jul 2004
    Location
    Posts
    13

    Re: obd-II read & flash

    FRom My MRDB Program these are

    00 05 10 04 00 08 0B 61 00 31 10 PCM 04 Request Clear Trouble Codes
    81 3B 10 04 40 36 Write Block of Memory in PCM Where Codes are Stored
    41 88 10 A3 AE Tell Tales PCM Washer fluid
    A1 7B 10 02 00 C5
    81 1B 10 25 00 00 00 00 00 81 Engine RPM
    A1 7B 10 02 00 C5 Odometer
    81 1B 10 25 00 00 00 00 00 81
    A1 7B 10 02 00 C5
    81 1B 10 25 00 00 00 00 00 81
    A1 7B 10 02 00 C5
    81 1B 10 25 00 00 00 00 00 81
    A1 7B 10 02 00 C5


  7. #7
    Tuner in Training
    Join Date
    Jul 2004
    Location
    Posts
    13

    Re: obd-II read & flash

    SCP
    Bosch Technologies Group Engineering DLWD.SCP
    [MESSAGES]
    <1> Request Diagnostic State Entry 44 28 F1 10
    <2> General Response from ECU 94 F1 28 F7
    <3> General Response from Tester 94 28 F1 F7
    <4> Request Stored Codes 44 28 F1 13
    <5> Report Stored Codes A4 F1 28 53
    <6> Request Clear Stored Codes 44 28 F1 14
    <7> Request Return to Operational State 44 28 F1 20
    <8> Request Parameter by PID 64 28 F1 22
    <9> Report Parameter by PID 94 F1 28 62
    <10> Request Parameter by DMR 74 28 F1 23 00
    <11> Report Parameter by DMR 94 F1 28 63
    <12> Diagnostic Routine Entry 54 28 F1 31 02
    <13> Diagnostic Routine Exit 64 28 F1 32 02 00
    <14> Diagnostic Routine Results 54 28 F1 33 02
    <15> Diagnostic ABS Command 84 28 F1 B1 00 2B
    <16> Diagnostic TC Command 84 28 F1 B1 00 5E
    <17> Request number of DTCs PID 64 28 F1 22 02 00
    <18> Request number of DTC due to test-on-demand PID 64 28 F1 22 02 02
    <19> LF WS sensor input PID 64 28 F1 22 39 88
    <20> RF WS sensor input PID 64 28 F1 22 39 89
    <21> LR WS sensor input PID 64 28 F1 22 39 8A
    <22> RR WS sensor input PID 64 28 F1 22 39 8B
    <23> Software version number PID 64 28 F1 22 E2 00
    <24> ECU prefix number PID 64 28 F1 22 E2 1A
    <25> ECU base number PID 64 28 F1 22 E2 17
    <26> ECU suffix number PID 64 28 F1 22 E2 19
    <27> ECU operating state PID 64 28 F1 22 D1 00

    I have Lots of This DATA from PRevious Trials and Tests

  8. #8
    Tuner in Training
    Join Date
    Jul 2004
    Location
    Posts
    13

    Re: obd-II read & flash

    [NODES]
    10 PCM Powertrain Control Module
    17 VLCM Relay Control Module
    28 ABS Anti-Lock Brake / Traction Assist Module
    61 MC Message Center
    70 SCIL Lighting Control Module
    90 CPM Cellular Phone Module
    98 EATC Electronic Air Temperature Controller
    A0 DDM Driver Front Door Module
    A2 DSM Driver Front Seat Module

    [PIDS]

    [MSGREC]

    [NETWORK]
    SCP

    [PRIMARY]
    <08> Engine Torque Command
    10 61
    <09> Engine Torque Status
    28
    <14> Air Conditioning Clutch Command
    10 17
    <15> Air Conditioning Clutch Status
    10 98
    <1B> Engine RPM Status
    28 61 70
    <29> Vehicle Speed Status
    70 98 A0
    <2A> Traction Control Command
    28
    <2B> Traction Control Status
    61
    <33> Brakes Status
    10 28 70
    <3B> Transmission / Transaxle / PRNDL Status
    10 28 61 70 A0 A2
    <48> Engine Coolant Command
    17
    <49> Engine Coolant Status
    10 61 98
    <4B> Engine Oil Status
    10
    <73> Charging System Status
    17
    <75> Electrical Energy Management Status
    70 A2
    <7B> Odometer Status
    61 70
    <87> Ignition Switch / Starter Status
    10 61 70 90 A0 A2
    <88> Telltales Command
    61
    <89> Telltales Status
    10 28
    <93> Vehicle Security Status
    10 70
    <96> Audible Warnings Command
    70
    <AB> Cellular Phone Status
    61 90
    <B4> Personalization Features Command
    61 70 A0 A2
    <B5> Personalization Features Status
    61 70 A0 A2
    <C2> Mirrors Command
    A2
    <C4> Door Locks Command
    A0
    <C5> Door Locks Status
    70
    <C6> External Access (Doors) Command
    A0
    <C7> External Access (Doors) Status
    61 70 A0 A2
    <C9> Seat Motion / Control Status
    61 70 A0 A2
    <D3> Restraints Status
    70 A2
    <D9> External Lamp Outage Status
    61 70
    <DA> External Lamps Command
    61
    <DB> External Lamps Status
    70
    <DE> Interior Lamps Command
    61 70 98 A0
    <DF> Interior Lamps Status
    70
    <EA> Displays Command
    61
    <EB> Displays Status
    61 90 98
    <FE> Network Control Command


    [FREAD]
    <10> PCM
    82 Fuel Flow (FR)
    <70> SCIL
    97 Vehicle Security Status (FR)

    [MESSAGES]
    <1> A/C Clutch Command - Disable
    61 14 10 01
    <2> A/C Clutch Command - Enable
    61 14 10 81
    <3> A/C Clutch Output Status Status
    61 15 17 3E XX XX XX
    <4> A/C Clutch Required Command - No
    61 14 98 04
    <5> A/C Clutch Required Command - Yes
    61 14 98 84
    <6> Actual Axle Torque w/ Min & Max Available Torque Status
    61 09 10 22 XX XX XX XX XX XX
    <7> All Door Lock Command - Unlock
    61 C4 70 01 00
    <8> All Door Lock Status - Lock
    61 C5 A0 81 00
    <9> All Door Lock Status - Unlock
    61 C5 A0 01 00
    <10> All Front Headlamp OK Status - No
    61 D9 70 01 08
    <11> All Front Headlamp OK Status - Yes
    61 D9 70 81 08
    <12> All Front Turn Lamp OK Status - No
    61 D9 70 05 08
    <13> All Front Turn Lamp OK Status - Yes
    61 D9 70 85 08
    <14> All Rear Brake Lamp OK Status - No
    61 D9 70 03 38
    <15> All Rear Brake Lamp OK Status - Yes
    61 D9 70 83 38
    <16> All Rear Tail Lamp OK Status - No
    61 D9 70 02 38
    <17> All Rear Tail Lamp OK Status - Yes
    61 D9 70 82 38
    <18> All Remote Door Lock Status - Lock
    61 C5 A0 89 00
    <19> Anti-Lock Brake System Failed Telltale Command - Off
    61 88 28 08
    <20> Anti-Lock Brake System Failed Telltale Command - On
    61 88 28 88
    <21> Autolamp Delay Command - Disable
    61 DA 70 10 XX
    <22> Autolamp Delay Command - Enable
    61 DA 70 90 XX
    <23> Backlighting Display Brightness w/ External Lamps Command - Off
    61 DE 70 11 XX
    <24> Backlighting Display Brightness w/ External Lamps Command - On
    61 DE 70 91 XX
    <25> Battery Voltage Status
    61 73 10 09 XX
    <26> Brake Lamp Pedal Switch Status - Active
    61 33 70 A2
    <27> Brake Lamp Pedal Switch Status - Inactive
    61 33 70 22
    <28> Cellular Phone Installed Configuration Status - Yes
    61 AB 90 BB
    <29> Chime Configuration 1 Command - Enable
    61 96 A0 91
    <30> Chime Configuration 1 Command - Enable
    61 96 61 91
    <31> Chime Configuration 2 Command - Enable
    61 96 61 92
    <32> Decklid Door Open Command - Yes
    61 C6 A0 81 34
    <33> Decklid Door Open Status - No
    61 C7 70 01 34
    <34> Decklid Door Open Status - Yes
    61 C7 70 81 34
    <35> Delayed Accessory Status - Off
    61 75 70 01
    <36> Delayed Accessory Status - On
    61 75 70 81
    <37> Desired Axle Torque Command
    61 08 28 0C XX XX
    <38> Display String Access Command - Clear Display
    61 EA 90 30 XX
    <39> Display String Access Command - Overwrite Display
    61 EA 90 B0 XX
    <40> Display String Access Status - Accept
    61 EB 61 B0 XX
    <41> Display String Access Status - Reject
    61 EB 61 30 XX
    <42> Download Block to Display Command
    61 EA 90 10
    <43> Driver's Door Lock Status - Unlock
    61 C5 A0 01 22
    <44> Driver's Door Open Status - No
    61 C7 A0 01 22
    <45> Driver's Door Open Status - Yes
    61 C7 A0 81 22
    <46> Driver's Mirror Down Motion Command - Disable
    61 C2 A0 02 1A
    <47> Driver's Mirror Down Motion Command - Enable
    61 C2 A0 82 1A
    <48> Driver's Mirror Left Motion Command - Disable
    61 C2 A0 04 1A
    <49> Driver's Mirror Left Motion Command - Enable
    61 C2 A0 84 1A
    <50> Driver's Mirror Right Motion Command - Disable
    61 C2 A0 03 1A
    <51> Driver's Mirror Right Motion Command - Enable
    61 C2 A0 83 1A
    <52> Driver's Mirror Up Motion Command - Disable
    61 C2 A0 01 1A
    <53> Driver's Mirror Up Motion Command - Enable
    61 C2 A0 81 1A
    <54> Driver's Seat Belt Attached Status - No
    61 D3 A2 04 22
    <55> Driver's Seat Belt Attached Status - Yes
    61 D3 A2 84 22
    <56> Driver's Seat Occupied Status - No
    61 C9 A2 13 22
    <57> Driver's Seat Occupied Status - Yes
    61 C9 A2 93 22
    <58> Driver's Seat Autoglide Status - Completed
    61 C9 A2 22 22
    <59> Driver's Seat Autoglide Status - Initiated
    61 C9 A2 A2 22
    <60> Engine Coolant Fan 1 Output Status
    61 49 17 3E 01 XX XX
    <61> Engine Coolant Fan 1 Speed Command
    61 48 10 01 XX
    <62> Engine Coolant Fluid Temperature Status
    61 49 10 10 XX
    <63> Engine Oil Fluid Temperature Status
    61 4B 61 10 XX
    <64> Engine RPM w/ Rate-of-Change w/ Throttle Position Status
    61 1B 10 24 XX XX XX XX
    <65> English / Metric Display Status - English
    61 EB 61 08
    <66> English / Metric Display Status - Metric
    61 EB 61 88
    <67> Fuel Flow (FR)
    63 82 61
    <68> Horn Configuration 1 Command - Enable
    61 96 A0 81
    <69> Ignition Switch Position w/ Initialize Status - No
    61 87 70 04 XX
    <70> Ignition Switch Position w/ Initialize Status - Yes
    61 87 70 84 XX
    <71> Illuminated Entry Command - On
    61 DE A0 90
    <72> Illuminated Entry Command - On
    61 DE 70 90
    <73> Key-in-Ignition Status - No
    61 87 70 05
    <74> Key-in-Ignition Status - Yes
    61 87 70 85
    <75> Memory Feature Menu Status
    61 B5 A0 10 XX XX XX XX
    <76> Memory Feature Menu Status
    61 B5 61 10 XX XX XX XX
    <77> Memory Features 1 Command - Recall
    61 B4 A0 09
    <78> Memory Features 1 Command - Store
    61 B4 A0 89
    <79> Memory Features 2 Command - Recall
    61 B4 A0 0A
    <80> Memory Features 2 Command - Store
    61 B4 A0 8A
    <81> Memory Features 3 Command - Recall
    61 B4 A0 0B
    <82> Memory Features 3 Command - Store
    61 B4 A0 8B
    <83> Memory Features Recall Cancel Command - Yes
    61 B4 A0 A0
    <84> Memory Features Recall Cancel Command - Yes
    61 B4 A2 A0
    <85> Memory Features Recall Cancel Command - Yes
    61 B4 70 A0
    <86> Network Bus Wake-up Command - Yes
    61 FE A0 82
    <87> Network Bus Wake-up Command - Yes
    61 FE A2 82
    <88> Network Bus Wake-up Command - Yes
    61 FE 70 82
    <89> Odometer Rolling Count Status
    61 7B 28 02 XX
    <90> Overdrive Telltale Command - Off
    61 88 10 14
    <91> Overdrive Telltale Command - On
    61 88 10 94
    <92> Passenger's Door Open Status - No
    61 C7 70 01 26
    <93> Passenger's Door Open Status - Yes
    61 C7 70 81 26
    <94> Passenger's Mirror Down Motion Command - Disable
    61 C2 A0 02 1E
    <95> Passenger's Mirror Down Motion Command - Enable
    61 C2 A0 82 1E
    <96> Passenger's Mirror Left Motion Command - Disable
    61 C2 A0 04 1E
    <97> Passenger's Mirror Left Motion Command - Enable
    61 C2 A0 84 1E
    <98> Passenger's Mirror Right Motion Command - Disable
    61 C2 A0 03 1E
    <99> Passenger's Mirror Right Motion Command - Enable
    61 C2 A0 83 1E
    <100> Passenger's Mirror Up Motion Command - Disable
    61 C2 A0 01 1E
    <101> Passenger's Mirror Up Motion Command - Enable
    61 C2 A0 81 1E
    <102> Remote Panic Button Status - Active
    61 93 A0 94
    <103> Request A/C Clutch Command
    61 15 17 41
    <104> Request A/C Clutch Required Command
    61 15 10 44
    <105> Request All Front Headlamp OK Status
    61 D9 61 C1 08
    <106> Request All Front Turn Lamp OK Status
    61 D9 61 C5 08
    <107> Request All Rear Brake Lamp OK Status
    61 D9 61 C3 38
    <108> Request All Rear Tail Lamp OK Status
    61 D9 61 C2 38
    <109> Request Anti-Lock Brake System Failed Telltale Status
    61 89 61 C8
    <110> Request Autolamp Delay Command
    61 DB 61 50
    <111> Request Backlighting Display Brightness w/ External Lamps Command
    61 DF 98 51
    <112> Request Backlighting Display Brightness w/ External Lamps Command
    61 DF 61 51
    <113> Request Brake Lamp Pedal Switch Status
    61 33 28 E2
    <114> Request Brake Lamp Pedal Switch Status
    61 33 10 E2
    <115> Request Cellular Phone Installed Configuration Status
    61 AB 61 FB
    <116> Request Decklid Door Open Status
    61 C7 61 C1 34
    <117> Request Delayed Accessory Status
    61 75 A2 C1
    <118> Request Delayed Accessory Status
    61 75 A0 C1
    <119> Request Desired Axle Torque Command
    61 09 61 4C
    <120> Request Driver's Door Open Status
    61 C7 A2 C1 22
    <121> Request Driver's Door Open Status
    61 C7 61 C1 22
    <122> Request Driver's Door Open Status
    61 C7 70 C1 22
    <123> Request Driver's Seat Belt Attached Status
    61 D3 70 C4 22
    <124> Request Driver's Seat Occupied Status
    61 C9 70 D3 22
    <125> Request Driver's Seat Occupied Status
    61 C9 A0 D3 22
    <126> Request Driver's Seat Occupied Status
    61 C9 61 D3 22
    <127> Request Engine Coolant Fan 1 Speed Command
    61 49 17 41
    <128> Request Engine Coolant Fluid Temperature Status
    61 49 98 D0
    <129> Request Engine Coolant Fluid Temperature Status
    61 49 61 D0
    <130> Request English / Metric Display Status
    61 EB 98 C8
    <131> Request Ignition Switch Position w/ Initialize Status
    61 87 90 C4
    <132> Request Ignition Switch Position w/ Initialize Status
    61 87 A0 C4
    <133> Request Ignition Switch Position w/ Initialize Status
    61 87 A2 C4
    <134> Request Ignition Switch Position w/ Initialize Status
    61 87 61 C4
    <135> Request Ignition Switch Position w/ Initialize Status
    61 87 10 C4
    <136> Request Key-in-Ignition Status
    61 87 A2 C5
    <137> Request Key-in-Ignition Status
    61 87 A0 C5
    <138> Request Memory Feature Menu Status
    61 B5 70 E0
    <139> Request Memory Feature Menu Status
    61 B5 A2 E0
    <140> Request Memory Feature Menu Status
    61 B5 61 E0
    <141> Request Overdrive Telltale Command
    61 89 61 54
    <142> Request Passenger's Door Open Status
    61 C7 A0 C1 26
    <143> Request Passenger's Door Open Status
    61 C7 A2 C1 26
    <144> Request Passenger's Door Open Status
    61 C7 61 C1 26
    <145> Request Traction Assist Active Telltale Command
    61 89 61 51
    <146> Request Traction Assist System Command
    61 2B 28 44
    <147> Request Traction Assist System Failed Telltale Command
    61 89 61 49
    <148> Request Transmission Actual Gear Position w/ Shift in Progress Status
    61 3B 28 C3
    <149> Request Vehicle Security System Status
    61 93 70 C1
    <150> Terminate Display Definition Command
    61 EA 90 11
    <151> Terminate Display Definition Status - Accept
    61 EB 61 91
    <152> Terminate Display Definition Status - Reject
    61 EB 61 11
    <153> Traction Assist Active Telltale Command - Off
    61 88 28 11
    <154> Traction Assist Active Telltale Command - On
    61 88 28 91
    <155> Traction Assist System Command - Off
    61 2A 61 04
    <156> Traction Assist System Command - On
    61 2A 61 84
    <157> Traction Assist System Failed Telltale Command - Off
    61 88 28 09
    <158> Traction Assist System Failed Telltale Command - On
    61 88 28 89
    <159> Transmission Actual Gear Position w/ Shift in Progress Status - No
    61 3B 10 03 XX
    <160> Transmission Actual Gear Position w/ Shift in Progress Status - Yes
    61 3B 10 83 XX
    <161> Transmission PRNDL Range Selected Status
    61 3B 10 04 XX
    <162> Vehicle Security Status (FR)
    43 97 10
    <163> Vehicle Security System Status - Disable
    61 93 10 01 XX
    <164> Vehicle Security System Status - Enable
    61 93 10 81 XX
    <165> Vehicle Speed - Low Resolution Status
    61 29 28 01 XX
    <166> Request DTCs.
    C4 28 F0 13
    <166> Report DTCs.
    C4 F0 53 XX XX XX XX XX XX

    [INITIALIZE]
    1 2
    4 5
    10 11
    12 13
    14 15
    16 17
    21 22
    23 24
    26 27
    28
    33 34
    37
    44 45
    54 55
    56 57
    61
    62
    65 66
    69
    73 74
    75
    92 93

    [STATRQST]
    <103>
    1 2
    <104>
    4 5
    <105>
    10 11
    <106>
    12 13
    <107>
    14 15
    <108>
    16 17
    <109>
    19 20
    <110>
    21 22
    <111>
    23 24
    <112>
    23 24
    <113>
    26 27
    <114>
    26 27
    <115>
    28
    <116>
    33 34
    <117>
    35 36
    <118>
    35 36
    <119>
    37
    <120>
    44 45
    <121>
    44 45
    <122>
    44 45
    <123>
    55
    <124>
    56 57
    <125>
    56 57
    <126>
    56 57
    <127>
    61
    <128>
    62
    <129>
    62
    <130>
    65 66
    <131>
    69
    <132>
    69
    <133>
    69
    <134>
    69
    <135>
    69
    <136>
    73 74
    <137>
    73 74
    <138>
    75
    <139>
    75
    <140>
    75
    <141>
    90 91
    <142>
    92 93
    <143>
    92 93
    <144>
    92 93
    <145>
    153 154
    <146>
    155 156
    <147>
    157 158
    <148>
    159 160
    <149>
    163 164

    [PERIODIC]
    <3> 1000
    <6> 25
    <25> 1000
    <60> 1000
    <63> 5000
    <64> 25
    <67> 224
    <89> 224
    <161> 1000
    <165> 448

    [PERIODIC_EVENT]
    <37> 56
    Desired Axle Torque - Cause a Traction Assist Event
    End the Traction Assist Event
    <62> 1000
    Engine Coolant Temperature - Turn Ignition from OFF to RUN
    Turn Ignition from RUN to OFF
    <162> 1000
    Vehicle Security Status - Turn Ignition from OFF to RUN
    Turn Ignition from RUN to OFF

    [EVENT]
    <1> A/C Clutch Command - Disable
    1
    <2> A/C Clutch Command - Enable
    2
    <3> A/C Clutch Output Status Status
    3
    <4> A/C Clutch Required Command - No
    4
    <5> A/C Clutch Required Command - Yes
    5
    <7> All Door Lock Command - Unlock
    7
    <8> All Door Lock Status - Lock
    8
    <9> All Door Lock Status - Unlock
    9
    <10> All Front Headlamp OK Status - No
    10
    <11> All Front Headlamp OK Status - Yes
    11
    <12> All Front Turn Lamp OK Status - No
    12
    <13> All Front Turn Lamp OK Status - Yes
    13
    <14> All Rear Brake Lamp OK Status - No
    14
    <15> All Rear Brake Lamp OK Status - Yes
    15
    <16> All Rear Tail Lamp OK Status - No
    16
    <17> All Rear Tail Lamp OK Status - Yes
    17
    <18> All Remote Door Lock Status - Lock
    18
    <19> Anti-Lock Brake System Failed Telltale Command - Off
    19
    <20> Anti-Lock Brake System Failed Telltale Command - On
    20
    <21> Autolamp Delay Command - Disable
    21
    <22> Autolamp Delay Command - Enable
    22
    <23> Backlighting Display Brightness w/ External Lamps Command - Off
    23
    <24> Backlighting Display Brightness w/ External Lamps Command - On
    24
    <26> Brake Lamp Pedal Switch Status - Active
    26
    <27> Brake Lamp Pedal Switch Status - Inactive
    27
    <28> Cellular Phone Installed Configuration Status - Yes
    28
    <29> Chime Configuration 1 Command - Enable
    29
    <30> Chime Configuration 1 Command - Enable
    30
    <31> Chime Configuration 2 Command - Enable
    31
    <32> Decklid Door Open Command - Yes
    32
    <33> Decklid Door Open Status - No
    33
    <34> Decklid Door Open Status - Yes
    34
    <35> Delayed Accessory Status - Off
    35
    <36> Delayed Accessory Status - On
    36
    <38> Display String Access Command - Clear Display
    38
    <39> Display String Access Command - Overwrite Display
    39
    <40> Display String Access Status - Accept
    40
    <41> Display String Access Status - Reject
    41
    <42> Download Block to Display Command
    42
    <43> Driver's Door Lock Status - Unlock
    43
    <44> Driver's Door Open Status - No
    44
    <45> Driver's Door Open Status - Yes
    45
    <46> Driver's Mirror Down Motion Command - Disable
    46
    <47> Driver's Mirror Down Motion Command - Enable
    47
    <48> Driver's Mirror Left Motion Command - Disable
    48
    <49> Driver's Mirror Left Motion Command - Enable
    49
    <50> Driver's Mirror Right Motion Command - Disable
    50
    <51> Driver's Mirror Right Motion Command - Enable
    51
    <52> Driver's Mirror Up Motion Command - Disable
    52
    <53> Driver's Mirror Up Motion Command - Enable
    53
    <54> Driver's Seat Belt Attached Status - No
    54
    <55> Driver's Seat Belt Attached Status - Yes
    55
    <56> Driver's Seat Occupied Status - No
    56
    <57> Driver's Seat Occupied Status - Yes
    57
    <58> Driver's Seat Autoglide Status - Completed
    58
    <59> Driver's Seat Autoglide Status - Initiated
    59
    <60> Engine Coolant Fan 1 Output Status
    60
    <61> Engine Coolant Fan 1 Speed Command
    61
    <65> English / Metric Display Status - English
    65
    <66> English / Metric Display Status - Metric
    66
    <68> Horn Configuration 1 Command - Enable
    68
    <69> Ignition Switch Position w/ Initialize Status - No
    69
    <70> Ignition Switch Position w/ Initialize Status - Yes
    70
    <71> Illuminated Entry Command - On
    71
    <72> Illuminated Entry Command - On
    72
    <73> Key-in-Ignition Status - No
    73
    <74> Key-in-Ignition Status - Yes
    74
    <75> Memory Feature Menu Status
    75
    <76> Memory Feature Menu Status
    76
    <77> Memory Features 1 Command - Recall
    77
    <78> Memory Features 1 Command - Store
    78
    <79> Memory Features 2 Command - Recall
    79
    <80> Memory Features 2 Command - Store
    80
    <81> Memory Features 3 Command - Recall
    81
    <82> Memory Features 3 Command - Store
    82
    <83> Memory Features Recall Cancel Command - Yes
    83
    <84> Memory Features Recall Cancel Command - Yes
    84
    <85> Memory Features Recall Cancel Command - Yes
    85
    <86> Network Bus Wake-up Command - Yes
    86
    <87> Network Bus Wake-up Command - Yes
    87
    <88> Network Bus Wake-up Command - Yes
    88
    <90> Overdrive Telltale Command - Off
    90
    <91> Overdrive Telltale Command - On
    91
    <92> Passenger's Door Open Status - No
    92
    <93> Passenger's Door Open Status - Yes
    93
    <94> Passenger's Mirror Down Motion Command - Disable
    94
    <95> Passenger's Mirror Down Motion Command - Enable
    95
    <96> Passenger's Mirror Left Motion Command - Disable
    96
    <97> Passenger's Mirror Left Motion Command - Enable
    97
    <98> Passenger's Mirror Right Motion Command - Disable
    98
    <99> Passenger's Mirror Right Motion Command - Enable
    99
    <100> Passenger's Mirror Up Motion Command - Disable
    100
    <101> Passenger's Mirror Up Motion Command - Enable
    101
    <102> Remote Panic Button Status - Active
    102
    <150> Terminate Display Definition Command
    150
    <151> Terminate Display Definition Status - Accept
    151
    <152> Terminate Display Definition Status - Reject
    152
    <153> Traction Assist Active Telltale Command - Off
    153
    <154> Traction Assist Active Telltale Command - On
    154
    <155> Traction Assist System Command - Off
    155
    <156> Traction Assist System Command - On
    156
    <157> Traction Assist System Failed Telltale Command - Off
    157
    <158> Traction Assist System Failed Telltale Command - On
    158
    <159> Transmission Actual Gear Position w/ Shift in Progress Status - No
    159
    <160> Transmission Actual Gear Position w/ Shift in Progress Status - Yes
    160
    <161> Transmission PRNDL Range Selected Status
    161
    <162> Vehicle Security Status (FR)
    162
    <163> Vehicle Security System Status - Disable
    163
    <164> Vehicle Security System Status - Enable
    164


  9. #9
    Potential Tuner
    Join Date
    Jul 2005
    Location
    Posts
    2

    Re: obd-II read & flash

    Tech-link,

    Thank you for sharing info. with us.

    But I try to understand the format you just wrote.

    For instance,

    <C4> Door Locks Command
    A0

    how do we command with this info? ???

    I have been trying get response from OBDII port with this info.

    No luck for now..

    :-[

    Project54

  10. #10
    Potential Tuner
    Join Date
    May 2011
    Posts
    2
    Did anyone figure this out? I would LOOOVE to know how to use these commands, but don't know if C4/A0 means "Mode A0, PID C4" or what this information actually means.

    I know this is an old post, but its right on the nose for what I'm looking for, so would love it if someone has any more insight!

Similar Threads

  1. Read fails after 3 minutes...
    By Backside180 in forum VCM Editor
    Replies: 4
    Last Post: 05-11-2007, 10:21 PM
  2. Flash chip read?
    By gman4dx266 in forum OBD-I & OBD-II Hardware And Communications
    Replies: 13
    Last Post: 12-25-2006, 01:04 AM
  3. Flash Data read
    By meny_usa in forum OBD-I & OBD-II Hardware And Communications
    Replies: 1
    Last Post: 11-01-2004, 09:26 PM
  4. 97-98 V8 and All V6 users - important read this
    By Chris@HPTuners in forum VCM Suite FAQ
    Replies: 0
    Last Post: 06-08-2004, 07:56 AM
  5. Flash File Editing/Upload/Downloading.etc
    By 03_EB_Z06 in forum OBD-I & OBD-II Hardware And Communications
    Replies: 4
    Last Post: 12-09-2002, 11:35 AM