Results 1 to 5 of 5

Thread: PE Delay on LS2

  1. 09-23-2006 #1
    baf2000_1
    baf2000_1 is offline
    Tuner in Training
    Join Date
    Aug 2006
    Posts
    22

    PE Delay on LS2

    I have my PE "Delay RPM" set to 1000. But the car does not go into PE until much higher RPM. Any thoughts out there?
    Reply With Quote Reply With Quote
  2. 09-23-2006 #2
    Bill@HPTuners
    Bill@HPTuners is offline
    HP Tuners Support
    (foff667)     Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    uh, you realize there is more then one marker to go into pe mode right?
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"
    Reply With Quote Reply With Quote
  3. 09-23-2006 #3
    baf2000_1
    baf2000_1 is offline
    Tuner in Training
    Join Date
    Aug 2006
    Posts
    22
    Looks like I can set Delay Rpm to 0 and PE mode is immediate. What other markers for PE are you talking about?
    Thanks
    Reply With Quote Reply With Quote
  4. 09-23-2006 #4
    Bill@HPTuners
    Bill@HPTuners is offline
    HP Tuners Support
    (foff667)     Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    throttle position, time markers in some calibrations, map, etc...by setting delay rpm to 0 will cancel out any time markers I believe, but the TPS marker is still active.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"
    Reply With Quote Reply With Quote
  5. 09-23-2006 #5
    baf2000_1
    baf2000_1 is offline
    Tuner in Training
    Join Date
    Aug 2006
    Posts
    22
    Yes indeed. TPS and RPM seem to over ride all . Thanks again!!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »