Wondering if you fellas could help me get a couple questions answered about my project that I am going to take a wack at tuning.
To start the engine is a 99 LS1/T56 in a 69 Camaro. I installed a Magnuson tvs2300 and AI 317 heads with cam on it. During the install I also installed a 2 bar MAP sensor also.
Initially I was planning on doing a SD tune to the car but wondering if I a MAF tune would work better for my car. Its not a drag car or anything more of weekend cruiser. I want to keep maximum drivability. Will I run out of range for the MAF with my current set-up? or will it just be better to stick with a SD tune?
Thanks in advance.
Sid