Histogramm No.1 and 2 only first row - PIDs correct. need help!

[Jochen]

I will stay with the current OS, no 2 bar SD OS.

Have a look at the attached file. You can see the table display shows the valus (red circle), in the histogram its not there. . .



This issue drives me nuts! I tried everything, it simply just dont show the complete histogram no. 1 and no. 2 . . .

[Bill@HPTuners]

I will stay with the current OS, no 2 bar SD OS.

Have a look at the attached file. You can see the table display shows the valus (red circle), in the histogram its not there. . .



This issue drives me nuts! I tried everything, it simply just dont show the complete histogram no. 1 and no. 2 . . .

same frame, my results

[Keith@HPTuners]

I see the issue, its because you are using , as your decimal place holder.

In your region settings, if you set it to be ##.## and not ##,## it will work perfectly.

[Bill@HPTuners]

damn, I didnt even notice that.

[Jochen]

Got it.

It has to do with the regional setting of my computer. In germany we use the "," instead of the "."

I had something like this before, when trying to add values into the PE table. The Software only took the values before the decimal "dot", and not the value after the dot. Strange is that it happened after upgrading to version2. No Problems with version 1.7.



Thanks to all for helping!

Greetings from germany. . .

Jochen

[Bill@HPTuners]

glad to hear that fixed it...sometimes things are seemingly so simple they get overlooked

[Jochen]

And here the proof of our success.
I had to change the regional settings from "german" to "US" to let the Software use the "dot", not the "comma".

Funny that it had to do with Windows settings and not with HPTuners settings.

Thanks again to all who helped!

Jochen