Hey, I am tuneing my A-4 in SDOL and have the VE table tuned in gear of course and is real close...is there a table to modify or something so you can have the Idle also stoich AFR?
thanks for any imput
Hey, I am tuneing my A-4 in SDOL and have the VE table tuned in gear of course and is real close...is there a table to modify or something so you can have the Idle also stoich AFR?
thanks for any imput
Huh? ---have the idle also stoich AFR?
Always Support Our Troops!
perhaps I did not ask the question correctly...I have stoich at idle in gear, when it is in neutral the idle is off...no load on the engaine...is there any table to adjust for this, my idle trims are real close...the only thing I think might help is adjusting the idle base airflow, or is there something like the frictional airflow table for this?
thanks for any help!!
Does your MAP Kpa move much between In gear and P/N? If so, you may want to work a bit more on the P/N VE & MAF settings.
Use the Idle RPM VCM Control to move your idle down to fill in the lower part of the VE table. You may find that it is a bit off at low RPM's.
Always Support Our Troops!
Reply With Quote