What WB sensor do you use?

[Kelp]

I am getting a WB but want the easiest one to hook up. I have HPTuners and heard many problems about configuring LC-1 with that. I am looking at PLX, another popular brand. Which PLX model do people use? Do I really need an AFR meter if I am logging it anyway? Thanks.

[Sp00ner]

I'm using the LC-1, I followed the instructions posted here, and had NO issues. I havne't been able to compare the readings with both the LC-1's software vs. HP Tuners software on the screen at the same time, my laptop is a POS, but the readings are within .1-.2 of each other by eye. I'm gong to do some serious comarisions this weekend to be sure it's on target...

I'm also using it to sim my NB O2

[Blue02WS6]

I use the AEM, only hot and ground to cig lighter adapter frm Radio Shack, one wire to HPT EIO pro unit and tap into ground to ground EIO, HPT has a pre-programed AEM and you are all set...never did this before and it took about 20 min to do all and set it up in car

[EC_Tune]

This Thread may give you some insight as well.