Results 1 to 9 of 9

Thread: New to HP Tuning

  1. #1
    Potential Tuner
    Join Date
    Jul 2006
    Posts
    8

    New to HP Tuning

    I have a 2006 Corvette A6 and would like to start tuning it. I have setup HP and run a couple of logs trying to get familiar with the process. I have begun reading threads and trying to assimilate a basic understanding of the process I need to go through. It appears the the first step is to modify the primary VE table before moving to the next step. The '06 PCM does not have a Primary VE table, only a Cranking VE table. Related table also do not exist Where should I begin?

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    TM, fan temps, maf, pe, spark, etc.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Potential Tuner
    Join Date
    Jul 2006
    Posts
    8
    So the assumption is that VE is correct under all conditions then?

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    there is no ve table on 06+ corvettes.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Супер Модератор EC_Tune's Avatar
    Join Date
    Apr 2003
    Location
    Almost 2000 feet.
    Posts
    7,876
    The 06 vettes are the easiest to tune yet. Without the normal VE table you only have to deal with TM MAF Spark & PE. (and all the other stuff you normally do...)
    Always Support Our Troops!

  6. #6
    Potential Tuner
    Join Date
    Jul 2006
    Posts
    8
    How do I deal with TM with an A6 trans. I could not identify a TM enable/disable toggle in any tab.

  7. #7
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    would you mind posting your file?
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  8. #8
    Potential Tuner
    Join Date
    Jul 2006
    Posts
    8
    I will put it up at home tonight.

  9. #9
    Супер Модератор EC_Tune's Avatar
    Join Date
    Apr 2003
    Location
    Almost 2000 feet.
    Posts
    7,876
    TM is in the engine file under TM > per gear ratio. There is no modifying the TCM yet.

    EDC
    Always Support Our Troops!