Does anyone have there idle TPS voltage at 0.8 or higher and not throw a TPS code?
I raised my set screw(as opposed to drilling throttle body) until the TPS voltage was 0.8 volts at idle and then I reset my TPS sensor so it was at 1%(would not reset to zero at this voltage). I now have shifting problems with erratic shifting, not being able to down shift as WOT, and I went WOT from a stop the other day and my car shifted 1-2 at 7216 rpms(1-2 is set at 680) at only 80% TPS while doing a burnout. The weird thing is that the day before I was able to get the TPS to 100% and this time I couldnt.
Anyone else have these problems? FIX?