2018 Mustang Ecoboost Throttle Closing

[VodeAn]

Car came to me with a mail order cal, complaint was that the vehicle was slow, upon logging I noticed the throttle closes under WOT.

I get these when logging.
Throttle Angle Source: TQ Red. < Driver Demand
Driver Demand Limit Source: Insufficient Fuel Flow



Thanks

[SultanHassanMasTuning]

how much boost is the car seeing

[VodeAn]

The log shows about 23 psi

I ended up figuring my issues out, I had to max out some of the exhaust protection parameters and play with the injector timing.
I also lowered the max desired boost a couple psi. The car now feels and pulls 1000x better.

But the throttle still closes for a new reason, the source and log is attached below.

Throttle Angle Source: Torque Control
Driver Demand Limit Source: Part Throttle
Torque Airlimit Source: Part Pedal Comb Prot.

Attachment 82351

Anyone know which tables I need to work with for this one?

[mJolnir]

The log shows about 23 psi

I ended up figuring my issues out, I had to max out some of the exhaust protection parameters and play with the injector timing.
I also lowered the max desired boost a couple psi. The car now feels and pulls 1000x better.

But the throttle still closes for a new reason, the source and log is attached below.

Throttle Angle Source: Torque Control
Driver Demand Limit Source: Part Throttle
Torque Airlimit Source: Part Pedal Comb Prot.

Attachment 82351

Anyone know which tables I need to work with for this one?

7150 part throttle max load