a litle idle help with a stage 4 vvt cam...... stalling after blip of the throttle

[kbturbo]

working on a 2010 Camaro with a stage 4vvt cam and an automatic trans. I'm working on the startup and idle on the car. ive gotten it nailed down decent except for it shutting off after you blip the throttle. It doesn't matter if its in park or in gear, when I rev it up even a little bit, itll shut off on the decal. I wasn't sure if it was in the throttle follower table??

I do most tuning on gen 3 motors so this setup is a little different for me. It's been fighting me so any help or pointers on this idle issue will be greatly, greatly appreciated so I can finish this headache and move on to the next one. Thanks guys

[Ben Charles]

Throttle follower Tq can fix this... could always increase base running airflow a little too

[jaydubb71]

Throttle follower Tq can fix this... could always increase base running airflow a little too

Like he said. Base running airflow...

[Tuckin15's]

I had the same issue on my Ctsv, I also increased the base running airflow and it corrected the problem.