I am having issues getting it to start after the engine is warm without hitting the gas a bit. I turned the Target Idle Speed table up 50 rpm but that did not help. What tables should I change to correct this issue? Would I need to change the Startup Idle RPM or the Idle Spark Advance tables? Thanks in advance
07 Silverado 5.3 full exhaust, CAI, BTR Stage 2 turbo cam and springs 226/231 .605"/.598" 113+4
Look at your Startup Cranking spark table. I had the same issue when I cammed my car and had to reduce the timing at the higher coolant temp ranges to -10 to -15* advance. Starts warm now no issue.
09 G8 GT- 224/234 114 cam, 3200 stall, 3.45 gears, Vararam, 1 7/8" headers, 3" exhaust, HSW nitrous
Bump up your Startup airflow table also
09 G8 GT- 224/234 114 cam, 3200 stall, 3.45 gears, Vararam, 1 7/8" headers, 3" exhaust, HSW nitrous
Reply With Quote