Bosch 0280158040 Injector data help

[Apples]

Hi,

I have Bosch 0280158040 Injectors installed in a LS1 turbo.
Does anyone have injector data for a P01/P59 pcm

Thanks

Allan

[lukearmstrong1990]

try setting the IFR table all to 100lb/hr if you have a return style system with 1:1 MAP reference regulator

or to first value being 0kpa manifold vacuum and last value being 80kpa vacuum if you have returnless fuel system. base pressure should be 58psi with engine off

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 MANIFOLD VAC KPA
100 102 103 109 110 112 113 115 115.5 116 116.8 118 119 119.98 121.8 123. 124. IFR lb/hr

if you have a reasonable camshaft that will get you started with the remainder of values as stockCopy of ID1000-GM-Characterization-Tables-3-23-2011.xls

or use the attached data with above IFR for 58psi or 4bar base pressure

[Apples]

I tried what you said to get it running made a base map with the wbO2 now if I enable close loop it tries to pull way to much fuel than what is in the ve map.
I was told to try Infinity Injectors 95lb GM Fuel Injectors INF95S data if anyone has this data could they share it with me.

Thanks

Allan