stock demon file

[RickClarke23]

anyone have a stock dodge demon file. I want to see how they used the tq reserve and also scaling for the map sensors. thanks

[Steven@HPTuners]

Here is both the normal and crate PCM files for you!

The crate PCM also includes a TCM read as well so you can see the modifications to the ZF8 calibration made for the Demon.

Standard warning: Do not attempt to save or flash these files, support will NOT refund credits in this situation.

[tbrtuning]

Thanks. Interested in TCM changes for sure.

[lafrad]

Woot.

[[email protected]]

Thanks Steven! What are the chances we could get a TCM file?

[JoshCP527]

Its part of it. Latest beta 1400 something but 1475 has the torque reserve for hellcats so get that. When we first got the crate PCM back it would not show the trans till dounloading an updated beta within 1 day. then a few days later it has the torque reserve added. I think it was 1440 then 1447 then 1475.

[ElecTech]

Here is both the normal and crate PCM files for you!

The crate PCM also includes a TCM read as well so you can see the modifications to the ZF8 calibration made for the Demon.

Thanks Steven! What are the chances we could get a TCM file?

[[email protected]]

Thanks ElecTech! I really need to pay closer attention...

[ElecTech]

Thanks ElecTech! I really need to pay closer attention...

[Carlyle_Eric]

Do we have a TCM file yet?

[ElecTech]

Do we have a TCM file yet?

The "CRATE" file posted above has the TCM read in it.

[Sébast19X]

I have ordered the DEMON injectors for my trackhawks. Is this better to change the transient value too or leave the stock trackhawk transient value ?

[rmrmd1956]

trying to view the files with the newest VCM 3.6 but it says there is a newer program. Any suggestions?
Thanks

[zhc]

trying to view the files with the newest VCM 3.6 but it says there is a newer program. Any suggestions?
Thanks

You need the latest beta to view the file. Send a message to support requesting access to beta and they should get you sorted out.