Hey guys, trying to get my truck tuned after swapping out the tired 5.3 for a fresh 6.0 with a BTR Stage 2 cam, long tube headers, and an intake tube. The fan has been replaced with an Caprice police special dual fans. I tried putting a 6.0 VE table in and it got worse. I have a new AEM 4110 O2 sensor, and it shows AFR's that vary a good bit. I cant get it to log on the graphs, but the gauge reads 14.7-15 and the table part of the scanner reads 10.2 but occasionally jumps to 14 or 19. I have verified that I have no misfires, good compression readings on all 8. I don't have enough powder to blow it up, and I really do need my truck. Here is a log, it looks crazy. Any ideas would be greatly appreciated!