Results 1 to 7 of 7

Thread: Enrich Desoot mode - what years is it available for?

  1. #1
    Advanced Tuner
    Join Date
    Sep 2007
    Posts
    394

    Enrich Desoot mode - what years is it available for?

    I'm still using version 2.24 but have considered upgrading to version 3.6 for the Enrich Desoot mode functionality in hopes of eliminating some huge lean spikes when I launch the car at the track.

    I'm a little confused though as to whether it's available for my 2007 Corvette. I browsed several tunes in the repository (using version 3.6 on my work laptop) but didn't see it show up in anything for 2007 but did see it in some (but not all) of the 2008 ones I looked at so I'm not sure what's going on.

    Is it not available for 2007 or would I only see it in my tune after doing a read entire using 3.6?

    Thanks in advance,
    Christopher

  2. #2
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,813
    I know it's not available for all of them, because I have requested it on a few and was told it wasn't available - not sure if yours is one of those...

    If it's not available then you most likely have something else going on...
    Last edited by GHuggins; 11-01-2017 at 07:44 AM.
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC

  3. #3
    Advanced Tuner
    Join Date
    Oct 2013
    Posts
    550
    Looks like GM started using that programming (Enable vs Disable switch) beginning in the 2008 model year calibrations. Have never seen it in any of the early Gen 4 controllers.

  4. #4
    Senior Tuner
    Join Date
    Jan 2014
    Location
    Australia
    Posts
    1,983
    mine is 2007 and its not there but also not needed because no issue caused by it, i also have a 2008 ecu that it does have in it, looks to be early to late 08 might be the changing point

  5. #5
    Advanced Tuner veee8's Avatar
    Join Date
    Apr 2006
    Location
    Raleigh, NC
    Posts
    449
    HP Tuners added it to all Gen IV ECM's that utilize it. If it's not in yours, GM didn't use it.
    www.crawford-racing.com
    Home of the original and best selling CR-Fueler plug and play port injection controller kits for all GM Gen V direct injection platforms.

  6. #6
    Advanced Tuner
    Join Date
    Jun 2011
    Location
    Montreal, Canada
    Posts
    758
    Not in my 07 vette either. Havent had a need for it luckily.
    2007 Corvette C6 Vert. A6
    LME LS402, Pat G custom cam, ATI 10% OD Damper
    Circle D triple disc 2600, 3.42 Diff
    YSI, 3.0 pulley, ID 1000's
    Alky Control Meth,
    ARH 1 7/8 headers,
    1009 RWHP @ 7000, 817 RWT @ 6000

  7. #7
    Advanced Tuner NJ_Phil's Avatar
    Join Date
    Jul 2016
    Location
    Flanders nj
    Posts
    283
    Every desoot problem I've seen, including mine, has shown up 2.1 secs after entering PE. It might be something else if you're going lean at launch.
    A log showing WB and EQ command would help confirm it.

    desoot1.png
    2012 C6 Base, Kooks 1-7/8" LT, Catted, NPP
    Novi 1500SL, 10% OD IW, Big Blower Cam, Flip Drive, 2x Alky, ID1000
    Nitto NT05R 305x19, 255x18 on CCW T10s
    Self built and tuned https://www.youtube.com/watch?v=Kod2UTqrVwM