Remote Tuning Support for E92A, T87A, FSCM F

[TYRFRYR]

Any projections when remote tuning will support the E92A, T87A and FSCM F controllers??

[Bill@HPTuners]

As long as the customer you are working with has an interface E92A & FSCM shouldn't be an issue. Hangup with the T87A is they need to be physically unlocked by us at our office to read them.

[TYRFRYR]

Thanks Bill....

A little more info:

The Vehicle that we are having trouble with is a 2017 Camaro SS. The T87A has been unlocked. The ECM , TCM and FSCM have all been licensed to MVPI (1068035180). Remote tuning has been set up with that MVPI as the Master and MVPI (1025773867) as a slave. Master and Slave are both using VCM Editor v.3.7.625.

Capture.PNG

Were experiencing the following:
1. Export is not available in the file menu.
2. When opening the "hpt" file on the slave and attempting to flash the vehicle using the slave MVPI, the slave is being presented with the licensing option dialog and is being asked to license the controllers...

Master Information:

Device ID: 1068035180

[Specific Controller]
GM E92A, 11162000096006TE, (GM: 4)
GM_FSCM_F, GA4066DA62030943, (GM: 1)
GM_T87A, 6A16209D0K006086, (GM: 4)

Slave Information:

Device ID: 1025773867

Should we open a support ticket on this or are we doing something incorrectly??

[Bill@HPTuners]

export is for ngauge & such, if the ngauge doesn't support E92/T87A theres not much we can do, that would be up to emotion to add support for them.

[TYRFRYR]

Thanks Bill. In this particular situation the Slave is using VCM Editor and an HPTuners MVPI and is unable to flash the vehicle.

[Bill@HPTuners]

Feel free to open a ticket with support, we should be able to test the master/slave on one of our test ecm's.

[TYRFRYR]

Opened a support ticket.....

Didn't understand the requirement for the slave to be licensed in order to flash a remote tuning file. Thought the master-slave relationship would use the master license for the slave to flash the vehicle.

Oh well....