Not sure how or if i can use 12598646 injector data from 2009 zr1 tables to 2000 firebird 411 pcm .
The tables look completely different and new to injector data tables . I cant seem to find the data and would borrow , beg or buy data.
Any help would be greatly appreciated .
Maybe someone will have something they converted but I'd honestly just try sticking the "close" lb/hr numbers into your tables and adjust as needed. You may or may not have to play with the voltage settings or min pulse width.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
different injector clips/harness you will need that first
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
2000 firebird ls3 6spd 4:10 rear
Alu flywheel and pressure plate
4.70 bore 4.125 stroke .
Scatt and Weisco
11.2 compression
LS3 Ported heads i dont have#s but should be close to a stage3 head
Tick perf cam
Tp235-368/248-360-111+2
Core 315654
Cam In dur 235.3 Ex 248.2
In lift .62585Ex lift .61207
Lsa 111+2 valve overlap 19.6
In cl 109 ex cl 113
Yella T 1.7 rockers
BTR 650 dual springs
Ti Retainers
Johnson hi rpm Link bar lifters
24x reluctor pcm 411
Fast 102 intake and t/b no maf just 1 bar map # 09359409
LS9 injectors # 12598646
walbro 450 with return line regulator set to 58
17/8 headers to true dual over axle straight through exhaust
Pump gas 93
Thanks for looking guys , i know i should of put more info in.
I had this car at a dyno shop with the original ls1 flash on that i tweeked just to get it there .
they did not change any of the inj data . it fouled the plugs before i got home with it .If anyone would want i will try to log and post files .
If you think it would be worth buying injectors with data i will .Sultan , you cleaned up the original ls1 flash and that worked perfect for a years but same car different engine. I dont mind spending a few $ , im this far cant stop now.
Again Thank You
LS9-to-LS1 injectors (EFI to HPT transpose).xls
ls9 to ls1 injector data file from some forum
Sylvain
Thank You i will give it a try
Last edited by ALM; 09-09-2017 at 12:50 AM.
did these end up working for you?? Im running an 0411 6.0L with ls9 injectors and hoping those values worked well enough that I should be able to get a first fire in on my setup
Thanks for the xls. Hey my new to this and the info you provided helped me get over the Fuel hurdle
Reply With Quote