Results 1 to 4 of 4

Thread: Starts then stall immediately

  1. #1
    Tuner in Training
    Join Date
    Aug 2014
    Posts
    22

    Starts then stall immediately

    6.0 woth a tick stage 2 sns torque max cam. And typhoon intake manifold and chinese throttle body. Runs good after you hold the gas and let it idle i did the raf table today and some part throttle tuning it drives great never stalls when driving. But everytime you start it it stall riggt away. Ive messed with cranking fuel, start up airflow, and open loop fuel table some. I can not tell why its doing it. You can keep it running with the throttle though. Any ideas or tips to figure it out maybe. It stalls fast and sometimes with a little stumbling then fully shutsoff. Ive tuned a couple cars with a big cam and have never had trouble with this. Please any advice.

  2. #2
    Post tune and log files.

  3. #3
    Tuner in Training
    Join Date
    Aug 2014
    Posts
    22
    I will tomorrow ill get some good logs to post and the tune im nust not at the car or my computer right now

  4. #4
    Tuner in Training
    Join Date
    Aug 2014
    Posts
    22
    I figured it out should of notcied it yesterday. Ve was way to rich leaned it up and it was fine.