I put a camshaft and removed DOD.however I do not have a Main 'VE table to increase fuel. I am lean all over my table in my tuning tools. I have other programs from 07 trailblazer with 6.0 similar in cam how can download that program with Main 'VE table into the 08 Suburban ecu.
There is no regular VE tables on GEN 4 computers, it's all Virtual VE (VVE).
Those are located under the EDIT tab, there is a built in VVE editor in there. You need to read up on how to tune the VVE. It's not much different that tuning a regular primary VE table but a few different steps.
You must use the newest 3.6 software to tune this, the older 2.24 will not have this editor.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Post your .hpt file, some of the earlier E38 operating systems have a 2.5 bar custom operating system available for them, it would be located under the OS tab if available. Otherwise as stated the VVE would be your best bet.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Reply With Quote