Gents,
I'm relatively new to this board so bear with me if this is a stupid question.
Is there an adapter that I can use that will allow me to install a wideband O2 sensor, rather than the narrowband used by GM in LS motors. I would like to switch one of the narrowband O2 sensors with a wideband, yet still have the ECU read the data that it needs (narrowband outputs), while being able to run an AEM 30-0333 AFR gauge and have the ability to read the wideband data through HPtuners.
I'm hoping there is an adapter, or something else, that will allow me to do this.
Thanks
Mark