Results 1 to 6 of 6

Thread: 3.5.789 Beta running CL lean ??

  1. #1
    Advanced Tuner NJ_Phil's Avatar
    Join Date
    Jul 2016
    Location
    Flanders nj
    Posts
    283

    3.5.789 Beta running CL lean ??

    E38/SD/2Bar.

    Loaded the new 3.5 beta, did a write entire, reset trims and was running 8-10% leaner during CL light cruise. Drove around for about 1/2 hour and LTFT are now correcting 10-12%.
    Tune was unchanged when switching to 3.5 and previously LTFT+STFT running 2-4% .

    Not sure if I should retune VE or first try going back to 3.4 to see just what changed. Looked around the forum to see if anyone else saw this but didn't see anything.

    EDIT: Added before and after scans
    Attached Files Attached Files
    Last edited by NJ_Phil; 06-02-2017 at 07:07 AM. Reason: Added before and after scans
    2012 C6 Base, Kooks 1-7/8" LT, Catted, NPP
    Novi 1500SL, 10% OD IW, Big Blower Cam, Flip Drive, 2x Alky, ID1000
    Nitto NT05R 305x19, 255x18 on CCW T10s
    Self built and tuned https://www.youtube.com/watch?v=Kod2UTqrVwM

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    anytime you change your software version/beta

    i would recommending reading the car with that new software version and save it ex: old tune 3.5xx

    there are changes that you may not see happening in the background
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    615
    Re-reading is not necessary. The binary content read initially does not change with software updates.

  4. #4
    Advanced Tuner
    Join Date
    Jun 2011
    Location
    Montreal, Canada
    Posts
    758
    I switched to 3.5 beta and suddenly had a horrible warm start problem. Literally had to hold the gas pedal almost to the floor and even then could barely get running.

    After going crazy trying things I did a write entire and the problem disappeared.

    I have a few other issues suddenly too and am going to try going back to pre beta version to see if it's better.

  5. #5
    i had te same problem . i found a blown exhaust gasket

  6. #6
    Advanced Tuner NJ_Phil's Avatar
    Join Date
    Jul 2016
    Location
    Flanders nj
    Posts
    283
    Not sure why but trims are back to normal now without any changes to the tune. Not sure what fixed it and it's possible I screwed it up but here's the exact sequence I did.

    Car running great on 3.4x. LTFT+STFT trims within 2%

    Download the same exact tune with 3.5x, write entire, reset fuel trims
    Result: Trims running 10% to correct for a lean condition even after driving around for about 20 mins.

    Download the same exact tune with 3.4x, then upload with 3.5x. Disable "Desoot" mode and download with 3.5x, reset fuel trims
    Result: Trims back to normal.
    2012 C6 Base, Kooks 1-7/8" LT, Catted, NPP
    Novi 1500SL, 10% OD IW, Big Blower Cam, Flip Drive, 2x Alky, ID1000
    Nitto NT05R 305x19, 255x18 on CCW T10s
    Self built and tuned https://www.youtube.com/watch?v=Kod2UTqrVwM