2005 F150. I cant get the rev limit to go more than the factory 5200. Any suggestions? Ive changed all the rev limters and speed limiters and cant seem to figure out what is going on.
Thank You.
Chad
2005 F150. I cant get the rev limit to go more than the factory 5200. Any suggestions? Ive changed all the rev limters and speed limiters and cant seem to figure out what is going on.
Thank You.
Chad
Just went on a test drive and in manual low and manual second it limits at 5200. In drive first and second gear, the limiter is where I set it.
With out being the file it would be hard to say, but you may want to look at your shift speeds, if you are increasing the RPM you normally also have to increase the speed or it will shift at a lower rpm anyway.Originally Posted by The Shop Inc
Its hitting a rev limiter before it shifts. But only in manual gears. When in drive it will be fine. But manual first or manual second still encounters the factory rev limiter at 5200.
Last edited by The Shop Inc; 04-05-2017 at 12:37 PM.
5800 rpms is too much. lower it to 5200.raise your mph or lower if needed.
Reply With Quote