Results 1 to 2 of 2

Thread: Wideband placement?

  1. #1
    Tuner in Training
    Join Date
    Feb 2017
    Posts
    24

    Wideband placement?

    I have a 2015 camaro ss. I have headers and no cats. So my question here is is it okay to place my wideband sensor in the secondary o2 sensor bung on the driver side? I have tried it once and when I did it the car at idle wanted to die and it surged really bad. So I put everything back to normal instead of continuing my WOT tuning. Could it mess with fueling or anything else if just ignore it? I was also reading people zip tied them out of the way. I unplugged it completely. Thinking that might have been my problem.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,565
    If you didn't disable all the codes and post cat o2 test and cat test itself, then you'll have problems. Otherwise you should be able to install it there no problem and remove the sensor.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.