I have a innovate mtx wideband currently installed and I think the sensor is going south on me. The gauge was shipped with a 4.2 sensor and would like to know if it worth it to upgrade to a 4.9 sensor.
I have a innovate mtx wideband currently installed and I think the sensor is going south on me. The gauge was shipped with a 4.2 sensor and would like to know if it worth it to upgrade to a 4.9 sensor.
Can you just swap to a 4.9 sensor? I don't think you can.. I had constant issues with my 4.2 MTX-L. Switched to PLX 4.9 for a year or so and never a single issue. Using AEM 30-0333 right now, no issues so far.. been 7 months or so
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
No you have to change out the cable also to the tune of $100 for the cable and sensor. I understand that you get a little more resolution with the 4.9. I have been getting strange readings with my current setup.
The reason I think it is getting flaky is if I am running in SD with steady throttle I see reading go from. 95 to 1.05 for no apparent reason and other times it will read steady as it should.
Closed loop or open loop? I got calibration errors every few weeks at best with that same WB, sometimes several times in one day.. it got really annoying
Reply With Quote