Ls1 from a 98 firebird, re pinned with an 0411 ecu. Removed VATS and turned off a few codes, switched the trans to manual.
Can connect with VCM editor and scanner, see attached log/tune. Is there anything I can be looking for there that would point me in the right direction? I can smell fuel after cranking so the injectors are firing, I can see RPM during crank so the crank sensor is working. No codes as far as I can tell.
I've stripped the harness and only have the essentials and to ensure everything is powered that needs to be. Separate switches for 12v, ign, and starter so everything keeps power during crank. Battery is charged.
I did get a few times where it turned over faster as if it was getting one cylinder to fire like it was almost maybe going to start but nothing.
Thanks in advance.