Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: Help with 1958 Impala Gen4 LS Swap

  1. #21
    Tuner in Training
    Join Date
    Mar 2012
    Posts
    30
    Your right on that one I didn't check the pin out just ohm'd the wires. That's a good catch i hadn't thought of, Thanks man..

  2. #22
    Tuner
    Join Date
    Feb 2013
    Location
    glennville ga
    Posts
    168
    did u get it figured out? pretty bad when u spend that much money on a harness and have to go through all this trouble. Thin when u call up the supplier they always try to steer u away from the harness. Something.
    2000 silverado rcsb lq4/4l80e. Custom s480 turbo setup. 93oct meth injected. SD Tuned by me.

    2007 tbss ls2/4l80e. Nitrous!!! MAF Only Tuned by me.

  3. #23
    Tuner in Training
    Join Date
    Mar 2012
    Posts
    30
    Yes I got it to fire off finally the coil plus weren't making good contact for some reason pulled them on and off a few times. So its in the relocation coil extensions not the PSI harness but I did go through the pin out an make sure.

  4. #24
    Senior Tuner
    Join Date
    Feb 2006
    Location
    Canada
    Posts
    1,958
    Glad it wasnt the harness...and good you found it! Had to be wiring, your flash was set correctly.
    2000 Trans Am WS6

  5. #25
    Tuner in Training
    Join Date
    Mar 2012
    Posts
    30
    I really appreciate all the help guys!