for the error i just used the maths error that is already in the scanner, just make sure u log EQratio commanded now
for the error i just used the maths error that is already in the scanner, just make sure u log EQratio commanded now
Should I leave the min pulsewidth 0 at 0 rpm or should I make that .125 as well?
MIPW.JPG
i have mine at 0 but think it should be ok either way
Answered in your other thread...Originally Posted by STR8BALLN
I just read some one said to set up a custom pid for (custom PID "True Commanded AFR" - Commanded AFR * .5) Not sure how to set this up in 3.2 channels? Since thay are called channels now vs pids.
Or should I set up a custom channel for: AFR commanded *.50= AFR commanded.
Then have the AFR error reference the custom channel?
Ed M
2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430
ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
http://www.ermperformancetuning.com
http://www.facebook.com/ERMPerformanceTuning
[email protected]
Thanks everybody, I think we are good to go. I hope this helps someone else too down the road.
Reply With Quote