Does anyone know the part numbers for the E38 type ECM connector parts and pieces ?
I want to build a bench programming harness.
Thank you
Does anyone know the part numbers for the E38 type ECM connector parts and pieces ?
I want to build a bench programming harness.
Thank you
I don't have the part numbers handy, but Mouser carries them.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
pins might be Female Molex MX64 pin Mouser 538-33467-0005:
http://www.mouser.com/ProductDetail/...hYiq3KjA%3D%3D
If you find the correct housing post it here I want some too.
Here is a list of some of the housings... the right one may just be in there somewhere:
http://www.mouser.com/search/refine....&Ntt=163190304
Or for $60 you can get both complete with wires and pins, you crimp yourself.
http://www.ebay.com/itm/New-2007-201...-/141849617831
Last edited by 10_SS; 10-05-2016 at 09:12 AM.
2010 Camaro LS3 (E38 ECU - Spark only). MS3X running complete RTT fuel control (wideband).
Whipple 2.9L, 3.875" Pulley, kit injectors, supplied MSD Boost-A-Pump, stock pump
LG Motorsports 1 7/8" Headers - No Cats, stock mid pipe with JBA Axle Back
ZL1 Wheels/Tires
You only need the 34566-0103 connector for bench programming the E38
-Greg
2009 Maverick Silver G8 GXP M6 - 586hp
Engine Mods: TVS 2300 Magnacharger ARH 1 7/8" long tubes with catted x-pipe
Drivetrain Mods: Ram Dual Disc Clutch
Suspension Mods: Pedders/Wretched basic drag pack - BMR trailing arms
Misc Mods: Jamesbiz Catch can - GRRRR8 Heater hose relo kit
X1 Housing:
http://www.digikey.com/product-detai...413-ND/3044539
X2 Housing:
http://www.digikey.com/product-detai...415-ND/3044540
Common housing cover:
http://www.digikey.com/product-detai...409-ND/3044537
Common pins
http://www.digikey.com/product-detai...9CT-ND/5287252
They offer 2 different wire exit angles since they are 90 degree connectors....not sure if it matters to you
Do you wire this similar to how they showed in the EFI live bench harness?