Results 1 to 2 of 2

Thread: need help with my 2010 impala 3.5 none VVT

  1. #1
    Potential Tuner
    Join Date
    Sep 2016
    Posts
    1

    need help with my 2010 impala 3.5 none VVT

    i put a after marked cold air intake on then the car bod out.. is there a tune are program i need for it.. i know i am getting to mush and the mass air is reading that so what can i do.. please if anyone has info post are email me .. earlaking007 @ yahoo... thank you

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,559
    Just an intake itself should not cause the cause to bog down or go into limp mode. Are you sure everything is installed correctly, the MAF sensor has no leaks before and after it and that it's still pointing the right way??
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.