Results 1 to 2 of 2

Thread: AEM WB setup guide?

  1. #1
    Tuner in Training
    Join Date
    Sep 2016
    Location
    Pinconning Mi
    Posts
    15

    AEM WB setup guide?

    AEM 30-4110

    Looking to set this up with HP tuners pro does anyone have a quick link/guide to a wiring schematic and sw guide?

    Thank you

  2. #2
    Tuner in Training
    Join Date
    Sep 2016
    Location
    Pinconning Mi
    Posts
    15
    Found my answer. Thank you Sloppy Mechanics!

    Capture 5.JPG14344070_10154596616676979_8903446420120410160_n.jpg

    "Bring the output wires of the aem in to the green connector of the mpvi. Pick an output and a ground. Then in setup make sure that you're logging the input(adding it to your channels). Once it's added you can right click on the mpvi input and choose transform. Go under air fuel ratio and find your wideband."