Hello all. I had the output of my interface hooked up to alarm my AFR gauge if it went lean. I had this option when I was using 2.22(2.24?). I can see how to configure the 4 inputs with 3.4, but I dont see anything on the 2 device out options. Any help appreciated.
1999 White T/A M6. 383 LT4 YSi 697RWHP/598RWTQ
Run your Gen1 or Gen2 SBC with the LS1 ecu
My mods
HP Tuners 3 Bar Enhanced OS with RTT, priceless.
There is no way to set outputs in V3 or newer
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
Thank you. Anyone know why this is? Do they still sell the interface with two outputs?
1999 White T/A M6. 383 LT4 YSi 697RWHP/598RWTQ
Run your Gen1 or Gen2 SBC with the LS1 ecu
My mods
HP Tuners 3 Bar Enhanced OS with RTT, priceless.
I do not know if the output feature is being added back into the software or not. I would suggest asking in the V3.2 thread and seeing what the HPT staff say.
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
Reply With Quote