Trying to log and flash my car but I can't get them to connect .iv reset my computer ,checked fuses and all . I have nothing but problems like this .what is the issue?
Trying to log and flash my car but I can't get them to connect .iv reset my computer ,checked fuses and all . I have nothing but problems like this .what is the issue?
Has it ever worked?
What version of Scanner/Editor are you using?
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
Here's the easiest way to check things... Just plug in your interface to your laptop - does the little green light, light up? If so - you have a good working connection to your computer... Now plug in just the interface (unplugged from the computer) to the vehicles OBD port, does the little green light, light up? If so - you should have a good power feed from the vehicle - now do a key on - does the "I think it's a second light" blink? If it does then you should have a good communication network to the vehicle...
I imagine yours isn't going to light when you plug into the OBD port - look for a cigar fuse or lighter fuse in your fuse blocks "most likely blown"...
If everything shows to be working, what version of HP are you using - 2.X / 3.X? If using 3.X, have you updated your interface? AND do you have all of the correct drivers installed? HP list one of them on their website, but I think this one automatically installs now anyway?
Anyway, just some quick things to check before contacting support...
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
Yeah iv checked the green light on both ends to make sure the box was getting power . I'll check to see if the other light comes on . I have the Bata software it's all been updated about a month ago .I flashed the car with a tune on it then now it won't connect or log .does this shit to me all the time .now I have a engine light on and I can't even see for what
Why are you still running the beta? I would use the latest software
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
that's what my tuner uses he likes it more idk. I got the scanner to connect once and now it wont again .
Again, what version?
Have you tried the latest version?
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock