this feature.PNG
Being able to hover over a table and right clicking to do paste instead of opening the table itself.
this feature.PNG
Being able to hover over a table and right clicking to do paste instead of opening the table itself.
Blind pasting won't be coming back.
However, you can right click on a table, and copy. Then, you can open another table, and just click anywhere and click paste, or just click the paste icon at the top.
We have a new system in development that will allow for easier copy/pasting/importing for building mass tunes.
We got this guy Not Sure, ...
Why is that? It was one of the most coveted features about your software to me. Ass far as building out your base tune before you get started it was the number one time saver. Build your high octane table out, stamp it quickly into all the other duplicate timing tables. Build your transmission shift tables out, use it to set all the other trans modes the same. I even used it more than the normal compare feature to transfer tables quickly from a compare file. Of all the things that make me loath 3.xx, this is the one that keeps me on 2.24 unless I have to use the version 3. Second is the copy / paste buttons not selecting all by default when nothing has be selected yet. That also henders quicky importing data from a compare file. I just don't see how retaining the feature impedes moving forward with the "new" plans for your software.
I create starter transmission tables in 3rd party software (from Bluecat) all the time...I think paste them in with the blind paste feature...it's my favorite way to do it. Then I just make minor driver feel based adjustments from there and I'm happy.
I'd love to see this feature come back.
2010 Camaro SS M6. Stock Bottom End, Heads/Cam/Intake/Headers/Exhaust.
2005 Silverado RCSB. Forged 370 LQ9/Borg-Forced Inductions T6 S484/Jake's Stage 4 4L80E with D3 Brake/4WD.
2023 Durango Hellcat
I believe this is to protect people from themselves. Blind pasting will copy a table in that may not fit, and cause all kinds of problems. making you to open the table to paste it forces you to actually look at the table, and see if they are the same, what you do from that point is on you, but at least you had the opportunity to verify. Granted us professionals (Usually) know what we are pasting to, and can do this efficiently, however we do have to remember that this software is marketed to the tuner shops and beginners alike.
Just my .02
Michael Bray
Rusty Knuckle Garage
Slidell, Louisiana
20yr Master Tech.
Advanced Level Specialist
Custom Car Fabrication, Customization, High Performance.
GM World Class Technician
Shop Owner
Maybe if it doesn't work in beginners view, but does in advanced?
or would that even be possible?
Michael Bray
Rusty Knuckle Garage
Slidell, Louisiana
20yr Master Tech.
Advanced Level Specialist
Custom Car Fabrication, Customization, High Performance.
GM World Class Technician
Shop Owner
I'm sure it's possible.. but Keith seems to be pretty adamant against it, likely or the reasons you mentioned already.. so I would not expect it to return
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
VIN tool is in 3.2
We got this guy Not Sure, ...
I looked in the editor this evening after a fresh DL/install and didn't see it. I believe you but man I feel like I looked all through the editor. I have a '411 ECM that is "an s10" and it needed to be an '02 Vette. In the prior SW I open the base cal of appropriate match (for the new vehicle), update the VIN, save the cal, do a full write and it's done. I hope it's similar and I'm low on coffee at the moment.
I don't know about the distaste for the table-paste, but could it be in the Advanced only mode with a warning about it's use or something? Tuning even ONE new auto car is much faster in the older ware. I did my first auto 8-speed Camaro a few weeks ago in 3.xx and I missed it more than I can say. I sailed through tuning a late model manual trans Dodge the following day with the same software and it was all love, it worked great from beginning to end. I'm ready to move daily work over to 3.xx, just hoping to have all of the old functionality in regards to high use tools.
Thanks.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
Frost, the VIN change is now a wizard, under the Edit menu.
We got this guy Not Sure, ...
2010 Camaro LS3 (E38 ECU - Spark only). MS3X running complete RTT fuel control (wideband).
Whipple 2.9L, 3.875" Pulley, kit injectors, supplied MSD Boost-A-Pump, stock pump
LG Motorsports 1 7/8" Headers - No Cats, stock mid pipe with JBA Axle Back
ZL1 Wheels/Tires
Can we at least get a response as to why it "won't be coming back"... It may not be a big deal to a hobbyist or noob, but to the rest of the us who do this for a living you broke your own software by removing one of the most versatile features. I can only think of one reason, and it is a pretty despicable one.
Last edited by Bluecat; 06-28-2016 at 04:16 PM.
Have to agree with Mike, it was great for updating Transmission tunes.......there are a shit load of tables to change!
Ed M
2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430
ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
http://www.ermperformancetuning.com
http://www.facebook.com/ERMPerformanceTuning
[email protected]
Which version will cure cancer?
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
4.2
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock