While working to tune my transient fueling, I've always had to account for a delay of about 100ms in my wideband signal. Is there any way to 'advance' an analog input's position in time in a log relative to the other PIDs to make it align with the actual operation? For example, I would like to shift my wideband input's readings 100ms earlier in time to account for the delay. I tried exporting the scan to .csv, applying this advance, resaving as .csv, and opening it as a log, but the importing dialog box never goes away and the log doesn't open. A much easier way would be to be able to apply a time shift to the analog input's playback readings in the final log, even if it isn't accounted for in the realtime streaming. I'm not sure how difficult this would be, but it would be of huge benefit in my opinion.