Trying to change a previously N/A car over to a 2 bar SD OS, it has a turbo setup on it now. I click on the OS tab and there is nothing in the box that opens. HPTuners was recently purchased new. The ECM is a 2001 F Body in a swapped Rx7. I tuned the car originally but with my software, my friend, the owner bought hptuners and it functions fine, just nothing in this OS box.
Turbo C5 FRC
Post your tune.
We got this guy Not Sure, ...
Will doOriginally Posted by Keith@HPTuners
Turbo C5 FRC
Also doublr check that you are in advanced view.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
What is Advanced View and how do I double check? His interface looks different than mine as it's the latest version so I am still learning to navigate.
Turbo C5 FRC
Edit > View > Advanced
Duh lolEdit > View > Advanced
Turbo C5 FRC
That solved it. Thanks man!Edit > View > Advanced
Turbo C5 FRC
I'm brand new. This just helped me too! Thanks.
PM
Same issue here. I checked to make sure I was in Advanced View and I also went back to basic and then to Advanced with no luck...
HP OS.JPG
Just updated from 3.0.83 to 3.0.118 with the same result nothing in the OS window.
After playing around I found that if you have already applied a custom OS nothing show up. If the tune opened is still the original OS, the selections are visible to apply.
Edit-->calibration details, controllers tab. It will show in there if a custom OS is already applied.
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
Reply With Quote