External A/D

[Jabbott]

So I am trying to add the user define. It lets me transform and copy but then I rename and put in my formula but it reverts back everytime. I am saving it but I can't figure out what is wrong. It does not put a drop down box under User Define either and where would it show up if I am selecting a gauge to the pid? Basically I am putting my boost gauge and fuel pressure gauge on my dash but it does not seem to work.
Thanks
Justin

[Keith@HPTuners]

What version of 3.0 are you using?

Can you walk us through, click by click, what you're doing, so we can try to reproduce your results?

[Jabbott]

If I go in a add a channel, then select A/D 2. Select again and Transform. Select GM 2 bar and copy the function to User Define. It does not show up under User define. I go ahead and make my changes and save. It shows up if I open it but it shows up as GM 2 bar data. It also does not show up if you click to add channel, I don't even see user defined in any of the folders.

[Keith@HPTuners]

The save icon is used to share transforms with others.

You need to click OK.

[Jabbott]

I just went back and read the help section. I am reading this right that I cannot have a User Define channel but it is something you all have to add?

[Keith@HPTuners]

You can have user defined inputs. You must select what parameter you want your input to act as, and then you can plot against that parameter in the layouts.

[Jabbott]

I did click ok, I just forgot to put that in there.

[Jabbott]

Ok I see what is wrong, I guess my formula is wrong. I am writing v/ 1*9.017+0.6614-14.7 It is erasing everything after the /1.

[Keith@HPTuners]

Posting screenshots of what you're seeing would help.

[Jabbott]

Ok, I will in just a little bit. Is there a way to rename the Transform?

[Jabbott]

Ok I figured it out, the tutorial didn't mention the tools bar with User Defined math. figured it out and appears to be working. I email support about my Wideband, do we have any solutions on getting the AFM 1500 in there and adapting it for serial.
Thanks