Here is what I am looking at in VCM Editor 3.0.37
Stock:
From my testing, it doesn't seem to respond when I change values in the High Flow (tried 70 psi) and Low Flow (tried 38 PSI), I also moved around the Mode Conditions.
In addition, this didn't work in the 2.24 version.
E67 - 2006 LE5 2.4 Turbo, 444 whp
E78 - 2013 LUV 1.4T
I noticed the same thing when messing with one of the Cruze 1.4T. I was trying to raise fuel pressure to help with the small injectors. I was only adjusting High Flow for WOT and it did not make any change on mine either.
Our software/hardware does not read the FPCM, whatever tables are you are seeing are in the ECM, not the FPCM...
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
So those tables are useless to edit then?Originally Posted by Bill@HPTuners
Reply With Quote