Hello all -
Just curious if this is normal behavior. Below I have two 3rd gear pulls, they were about 30 seconds apart.
Pull 1: pull_1.JPG
Pull 2: pull_2.JPG
As you can see, in pull 1 my AFR is 11.9 VS pull 2 where my AFR is 11.4. The IAT differences are only 5 degress (first pull 59, second pull 64). Is this something normal with HPtuners? I know the boost levels are marginally different but the second pull has a little more boost and a lower AFR. They are both within the same point in the tune (5200 rpm, 152kpa).