OK guys newbie here. I've spent the last few hours trying to get my fast dual wideband to link up with my HP Tuners pro. I've read about 5 different post all
relating to the FAST wideband and read the "How to interface your wideband with V3.0" about 20 times and sat in the car trying different parameters to get a reading with no luck
Now I've noticed in V3.0 that there are predefined sensors and the FAST is not one of them. I did the add channel> MPVI 1>transform, put in the info I acquired from an older post regarding the voltage offsets but when I click the "<click or insert to change>" to add a parameter I do not know what to set it as.
Am I stuck waiting for an update to get this wideband to work out or am I better off selling it and getting a different wideband. I can get my hands on an Innovate DLG-1 but I don't want to run into the same issues. The only thing that got me somewhat in the ballpark was setting the parameter to " Lambda -> AFR (14.7) Gasoline but it was still off by a decent amount and continued reading an AFR from somewhere with the MPVI 1 disconnected.
Does anyone know what I can do to use the FAST or should I just abandon ship and get one that is on the list? I'm also still very new to all this and to the HP program but I'm catching on fairly quickly. Any insight would be very greatly appreciated