I'm trying to do an AFR error Table but I'm unable to find any AFR Commanded PIDS to log. Infact the only PIDS that I can find seem to be SAE pids.
I'm able to view and log the Wideband without issue.
Id greatly appreciate any input.
I'm trying to do an AFR error Table but I'm unable to find any AFR Commanded PIDS to log. Infact the only PIDS that I can find seem to be SAE pids.
I'm able to view and log the Wideband without issue.
Id greatly appreciate any input.
Try looking for "Air/Fuel Ratio Commanded"
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
Im actually missing all but the very basic (16) PIDS. I've emailed support and also contacted another user that had the same issue when connected to a Cavalier. I really hope to get a resolution soon as its still strapped down to the Dyno
Ah gotcha. Strange. Let us know what support says.
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
I can confirm this issue has been fixed with build 3.0.83 - Scanning features have all returned.
Good to hear.
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
Reply With Quote