It's there, it was just renumbered/named.
It's there, it was just renumbered/named.
We got this guy Not Sure, ...
Any idea what it is now? It's not Throttle Position.
2013 OBM A6 CTS-V Coupe
Mods: Headers back Billy Boat Exhaust, GripTec 2.65, 8.6 PowerBond Lower, LSX Innovations Solid Isolator, ID850's, NGK TR7IX's, Accel 9070CK Wires, Spectre CAI, SRI Ported Throttle Body, SRI Catch Can, NGK AFRM, 160* T-Stat, 0fx2gv Brick, Hard Line Delete W/3/4" Lines, FB 101 FMIC, Pierberg CWA50, Stoptech Drilled/Slotted Rotors, EBC Redstuff, Cut Stock Springs, Flat Bottom Steering Wheel
2006 Black Raven STS-V (Traded In)
Fully Modded: 459RWHP@5888rpm/451lbft@4696rpm
It likely is, it might show multiple, 1 byte and 2 byte.
We got this guy Not Sure, ...
Anyway to have the number and the name displayed for channels/pid/sensor whatever we're calling it I think that would help people make their math parameters more easily without asking as many questions.
In 2.24 it showed the sen# or pid# along with the actual name at same time where in 3.0 you don't know if your picking the right one until after u pick one then you see the number for it and if it wasn't what you were after you have to re navigate it
After I figured out where the user defined slots were I figured the rest out really quick. I love how it automatically changes things without having to save when making graphs make it easy to make changes
Last edited by drj8787; 02-06-2016 at 09:07 PM.
2008 Pontiac G5 2.2L (main oil seal became a crunchy Autumn leaf, RIP)
2016 Fiesta 1.0L Ecoboost - Project "not-so-detestable"
PID 2112 has become 2111.
We got this guy Not Sure, ...
New scanner looks great guys, on my fg falcon i6 I can log rpm, speed, accel/etc, cam, ect/iat, kr, spark, commanded lamba, inj pw, load and fuel trims. When I log ba falcon i6 I can only log rpm, speed, ect/iat, spark and fuel trims. What am I doing wrong? Thanks in advance
Hey guys,I can't connect my innovate lc2 wb..when I add the channel and start scanning it just goes away..Need help how to add my wb to the scanner..thanks
Any word when VCM Scanner's exporting functionality will be resolved?
wideband support? the BM AFR500 was in the beta now I cant find it.
Edit: Never mind I figured it out.
Last edited by fullthrottle; 02-07-2016 at 11:10 AM.
Got GEN II-IV LSx or GEN V LTx parts to sell? Post em completely free on LSx LTx buy/sell/trade Facebook group. Invite your friends.
https://www.facebook.com/groups/169854669867850/
DO YOU OWN A FORD, DODGE OR GM ALLOYTECH VEHICLE AND GET A MESSAGE SAYING "VALIDATE CHECKSUM FAILED. YOU WILL BE UNABLE TO SAVE OR FLASH THIS FILE." IF SO FOLLOW THE LINK BELOW.
http://www.hptuners.com/forum/showth...lash-this-file
I got up to post about 450, but I didn't see it asked, and I searched this thread for it....
I have a 2000 f-body, with a 2002 3-bar OS, and I have both an AEM wideband, as well as an autometer fuel pressure sensor. I was able to get the AEM wb setup, but I didn't find the autometer fuel pressure sendor. Can this be added please?
2000 T/A - Thompson Motorsports 416ls3, F1A procharger, HP tuned. Just a couple psi of boost.
2013 Mercedes C350, wish HPtuners worked.
I do not, but I will search for it. It was in 2.24, so I never bothered looking it up.
This is the one I have, but I'm not finding any calibration data yet.
http://www.autometer.com/100-psi-pre...ransducer.html
Last edited by The Alchemist; 02-07-2016 at 11:33 AM.
2000 T/A - Thompson Motorsports 416ls3, F1A procharger, HP tuned. Just a couple psi of boost.
2013 Mercedes C350, wish HPtuners worked.
2013 OBM A6 CTS-V Coupe
Mods: Headers back Billy Boat Exhaust, GripTec 2.65, 8.6 PowerBond Lower, LSX Innovations Solid Isolator, ID850's, NGK TR7IX's, Accel 9070CK Wires, Spectre CAI, SRI Ported Throttle Body, SRI Catch Can, NGK AFRM, 160* T-Stat, 0fx2gv Brick, Hard Line Delete W/3/4" Lines, FB 101 FMIC, Pierberg CWA50, Stoptech Drilled/Slotted Rotors, EBC Redstuff, Cut Stock Springs, Flat Bottom Steering Wheel
2006 Black Raven STS-V (Traded In)
Fully Modded: 459RWHP@5888rpm/451lbft@4696rpm
Where is the rest of the gear/tire wizard 3.0.15image.jpg
Hey guys,I have some trouble connecting my innovate lc2 wb to my scanner..I add it as a Chanel from serial port and it shows up in the channels but when I start logging it goes away..can anybody explain how I can add the wb?
Great job on 3.0 and especially the support. But not being able to math parameters against themselves is causing confusion for me anyway.
For example Lamba Error (wideband/commanded lamba) I've tried using parameters and sensors but my readings are inaccurate.any help
would be greatly appreciated. Thanks