Results 1 to 5 of 5

Thread: Innovate LC-2 Setup for 2.25 VCM Scanner Beta

  1. #1
    Tuner in Training
    Join Date
    Jul 2015
    Posts
    19

    Innovate LC-2 Setup for 2.25 VCM Scanner Beta

    Here are some screenshots showing how I setup my Innovate LC-2 wideband for Lambda reading with the latest VCM Scanner 2.25 Beta. The scaling and offset were taken from the Innovate documentation and match with another wideband we have setup in the shop.

    step1.pngstep2.pngstep3.pngstep4.png

  2. #2
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    When you add it using the SP2, it should work without scaling.

    The serial stuff is still a bit of testing.. I'll be creating a thread so we can test them together in the next few days.
    We got this guy Not Sure, ...

  3. #3
    Tuner in Training
    Join Date
    Jul 2015
    Posts
    19
    When I first added the serial interface it was showing large counts in the 600 range, which fit with the equation I found in the manual. Let me know if I can assist with some testing.

  4. #4
    Advanced Tuner
    Join Date
    Oct 2011
    Location
    QLD, Australia
    Posts
    436
    Keith did you have any joy adding the Innovate MTX-L?
    Ford BF Turbo Ute,Stock head/cams, In house built bottom end,Atomic Springs, Forged Rods,Cosworth Pistons,Atomic Billet oil pump gears,ARP Head/mainstuds,Process West Stage 3 Cooler Kit- Plazmaman plenum,Precision Int.Gate 6466,Manta twin 3" exhaust,ID1000s Plazmaman surge with Holley 12-1800 pump, Home Built ZF6H26, On United Pump E85 499rwkw 10.5@135mph https://www.youtube.com/watch?v=dgZupPhrMss
    Latest mods, FG intake manifold conversion and ID1300s-500rwkw, Yet to see the 1/4Mile

  5. #5
    Tuner in Training
    Join Date
    Mar 2007
    Posts
    42
    I'm getting 1000 and gradually goes to 500 range as the car warms up, SP2 also using LC-2 serial.
    2001 SS M6
    243 heads LSR cam, ls7 lifters, hardened pushrods, trunion upgrade, dual gold springs, OBX lt headers, hooker catback, HV oil pump, true double roller timing chain, zr1 17x11 rear. was 383rwhp/376tq, now spinning on the dyno at 366hp.