Wondering if it is possible to add the Variable Cam tables for the attached tune file. The only VCT adjustments are to determine which VE table to use based on cam positioning. We are wanting to be able to move the exhaust cam around based on cylinder air mass and rpm. Would also like to see additional tables under Idle > Airflow. Looking to be able to increase Base Running Airflow and Throttle Follower. The idle likes to hang for a long time with he clutch pedal in. If this is something I need to forward to support I will. I wanted to post it here for others to see as well.
ORG - Original Read from the PCM
HPL file is from back to back dyno pulls with a modified tune file not attached.
Reply With Quote
