Sorry for the repost but I really need to get some input on what is going on & how I can fix it.
I just installed 2.24 & updated drivers for win 7.
Opened Scanner & connected to PCM. Radio shut off so I turned the key off & then back on. Radio came back on & dash comes on but Car wont start & the relay under the hood just clicks.
Never had this happen. What is going on? I just drove the car not 15 minutes ago so it has to do with the vats & the scanner. Also it says ABS fault on the dash as well as fuel gauge error. now I turn the key on & the fuel gauge wont go through its test cycle.
Since I posted I disconnected the batt for 20 min. the gauge cluster now works but the under-hood relay just clicks. If I try it a couple times the gauge quits working again until I reset the batt again.
I really could use some input on this as it is my DD & I cant be without my car.