This is a 90s model truck with a 6.0 swap 4l80e swap. It has Deatwerks 42 lb fuel injectors and a ms3 cam I believe. It was original mail order tuned by the individual who made the wiring harness. The tuner didn't dohe segment swap for the 4l80 and this is why the customer brought it to me because of the transmission issue. Now it is running rich and still not at its power potential. Im used to seeing ve tables in the 30 to 80 range or so but this one is in the tens of thousands. If I copy in a different ve table out of another cammed truck it wont even run. When I try to tune the ve with the scanner it reads about -9 to -13 in every cell. After I add this histogram to the ve table and rescan it still reads the same over and over again. Please help
6.0 tbi swap 8.hpt