Hello,
I am in the middle of tuning a 2013 f-150 5.0 with an edelbrock supercharger and long tubes. It's not making much power because I've hit a wall with the tune and cannot get it to allow more than 13 degrees at WOT regardless of my commanded timing and changes iat tables and other various timing tables. All torque management is disabled. I've attached a copy of the tune and a quick log. I'm wondering if there is a missing table limiting my timing.
I've not had this issue with any other Fords to date using HP.
Thanks for any input!
13 F150_EDELBROCK SUPERCHARGER_WTF.hpt3RD PULL 360WHP.hpl
Nick