Results 1 to 5 of 5

Thread: JK Jeep 3.6 Magnuson blown with trans calibration file

  1. #1
    Tuner Stevo's Avatar
    Join Date
    Mar 2011
    Location
    Melbourne
    Posts
    86

    JK Jeep 3.6 Magnuson blown with trans calibration file

    Hey guys, just attached a tune from a customers car. 2014 JK jeep with an A580 transmission (tuned) and a Magnuson TVS1320 on 7psi with a 2BAR MAP sensor. Car has 35 inch tyres too Use it if you wish. I've had a great outcome and the customer is very happy too. Thanks to HPT for the awesome work.
    Last edited by Stevo; 09-28-2015 at 10:29 PM.

  2. #2
    Advanced Tuner
    Join Date
    Sep 2008
    Location
    Portersville, Pa
    Posts
    289
    Stevo, Thanks for posting the file! Any chance we could get you to post the original scan so that we can "compare" to see your changes? Also, what did you use to change the tire size? AEV Procal? Superchips Flashpaq?

    Thanks in advance!

  3. #3
    Tuner Stevo's Avatar
    Join Date
    Mar 2011
    Location
    Melbourne
    Posts
    86
    Quote Originally Posted by [email protected] View Post
    Stevo, Thanks for posting the file! Any chance we could get you to post the original scan so that we can "compare" to see your changes? Also, what did you use to change the tire size? AEV Procal? Superchips Flashpaq?

    Thanks in advance!

    Attached file below. Not sure what the customer uses to change the tire size, but I just changed the shift points to suit. You will find the part throttle shifts are in OSS - Output shaft speed as opposed to VSS or wheel speed sensor.

    V1 STOCK JEEP CRAWLR.hpt

  4. #4
    Senior Tuner
    Join Date
    May 2015
    Posts
    1,908
    your stock read seems like it didn't fully read, it only has two tabs of the trans stuff.

  5. #5
    Potential Tuner
    Join Date
    Feb 2017
    Posts
    1
    Hi guys, can someone please upload the modified calibration file again or specify proper shift points?