I've adjusted the Knock Retard PID for Copperhead and Tricore Processors.
A positive value = KNOCK!!!
A negative value = PCM Adding timing.
This change is in version 2.25.2468
I've adjusted the Knock Retard PID for Copperhead and Tricore Processors.
A positive value = KNOCK!!!
A negative value = PCM Adding timing.
This change is in version 2.25.2468
Eric Brooks
HP Tuners, LLC
Awesome
2013 Mustang GT
Thank you for updating. I was out logging and saw a bunch of negative on the PID. Had me worried for a minute.
What does - 127.5 mean? Lol. I see that often. I assume a precursor to knock.
Yeassss!!!!!!!
2012 3.7L v6 Mustang
1988 5.3 LS RX-7
How about the DMR for KR on oak processors? Any update?
2007 Mustang GT
305ci big bore (5.0L Cammer block)
Ported heads
Lunati cams and springs
Usual compliment of bolt-ons
I do get knock voltage. Doesn't mean anything to me though. I've asked a couple times what the voltage means and what the threshold is between knock and no-knock by voltage but have not received any replies.
2007 Mustang GT
305ci big bore (5.0L Cammer block)
Ported heads
Lunati cams and springs
Usual compliment of bolt-ons
Knock Retard DMR for Oak strategies is coming.
Eric Brooks
HP Tuners, LLC