You can also read the new module separately, it will show up as a 3rd module when you gather info on an automatic and the 2nd module on a manual.Originally Posted by DSteck
You can also read the new module separately, it will show up as a 3rd module when you gather info on an automatic and the 2nd module on a manual.
Woohoo
Incorrect
its in the CCM.
Doesn't really matter.
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
yes you can edit those codes now.. this is super interesting.
Thanks for the update.
Are the exhaust valve codes supported for 6th gen Camaros? I pulled the tune back out on a 2016 Camaro yesterday (using the latest beta as of yesterday) but it only gave me the option to pull C7 CCM. I tried anyway and it didn't seem to give me access to anything other then the E92 engine and trans parameters. Getting the standard 4 P12XX codes for removal of the AFM valves.
Last edited by LT1Z; 02-17-2017 at 10:46 AM.
Did the "C7 CCM" option seem to read on your vehicle? If so, please e-mail us that file.
It gave me the option to read it but it didn't seem to add anything to the file. I just emailed support with the file.
Where did you look for the codes?
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
Everywhere I could. Didn't see them in any of the current DTC lists and no new tabs popped up.
You should have a tab under Fuel System if it actually adds it.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
Actually the tab is under "system" > "DTCs"
I pulled the CCM on my 16 Z06 and 4 others here at the shop (all were 2016's). None of the files are able to remove the codes through the CCM. The DTC list is available for viewing but this is what it looks like.
DTC list.png
Which codes are active on the car?
Interesting. The CTS-V stuff comes up under Fuel System.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
Thats a good question. I need to plug into a non Z06 car. Ive heard that the Z's dont have the exhaust valve codes like the base C7 does.
That's the reason I asked. The DTC list is setup correctly.Thats a good question. I need to plug into a non Z06 car. Ive heard that the Z's dont have the exhaust valve codes like the base C7 does.
is it possible to add controll for the exhaust valves like Eric do on the Shelby GT350?
Support just contacted me and said the latest beta as of now may allow the 6th gen exhaust valve codes to be removed. I will try it as soon as the car comes back in and report back.
i need to control the exhaust Sound Quality valves to become the cars street legal here in Europa.
please can you Support this?
Reply With Quote