ok guys, so this is my tune and a few logs.im stationed in the UK, so im sure I may be the only person in the country with HP tuners..lol the story is. the car ran 12.3 at the stripe with a vortech v3si and a can tune @6.5 psi. I paid an un-named vendor 250 to help me remote tune it with HP tuner after I installed the 3.33 pulley and a bap and then the car ran a 13.0. wasn't spinning seems to be holding back. I have a restrictor plate so boost is around 7.5/8psi.
2010 SS A6
mods are
vortech v3si
3.33 pulley and restrictor plate..7.5/8psi
fast 65lbhr injectors
high flow cats
ECS BAP
flowmaster catback with h pipe
ported throttle body
any help would be great..